View Full Version : Parts exchange
Highway Star
02-19-2010, 05:52 PM
Do you have anything laying around that might be someone else's treasure?
This has worked well on other boards, maybe we can have some luck here with it, too.
I don't have much by way of spare parts, but it is a start...
70 something GM Aluminum Dual-Plane 4 Barrel spreadbore intake
(can get casting # if needed)
1/2" Aluminum spreadbore to squarebore adapter
Accel super coil (HEI)
grandsport
02-19-2010, 08:39 PM
You guys know what I'm aching to say.Waving
flash
02-19-2010, 08:45 PM
Go ahead and say it Gary.
Highway Star
02-19-2010, 09:47 PM
(Yelling at the top of my lungs like Sam Kinnison in "Back to School")
Saaaayyyy it!!! Saayyyyy IIIttttt!!!!!!!!!!!!!!!!!!Waving
grandsport
02-19-2010, 10:03 PM
The item I could possibly be looking to exchange,has nothing to do with cars.
The only thing I can say is there is a ton of money invested in this item that could or could not be exchanged.Have paperwork.:)
piette
02-20-2010, 11:15 AM
The item I could possibly be looking to exchange,has nothing to do with cars.
The only thing I can say is there is a ton of money invested in this item that could or could not be exchanged.Have paperwork.:)
You keep the wife Gary :D
Jeff
Durand
04-01-2010, 02:10 PM
Guys:
If anyone is interested, I have a few things to send along to others just for the cost of shipping and maybe swapping.
Here is partial list:
69 dog dish center caps for 14" rims (probably good to use on 15" rims) driver quality
Had the complete set but can only find 3 now.
Miscellaneous column shift linkage for a pwerglide and for a 3 speed auto trans
original spare 14" rim
Set of 4 semi complete,as in nonmatching trim rings, 15X7 rally rims with derby caps and trim rings. Need to be blasted and painted
I realy have no real desire to ship but if anyone is interested, let me know and I would only ask actual cost or come by Memphis TN and I can meet you.
Durand
498 SS
04-01-2010, 11:28 PM
It would be better to tell me what you need for a 1967 or a big block.
Ms Grumpy
04-02-2010, 06:23 AM
The item I could possibly be looking to exchange,has nothing to do with cars.
The only thing I can say is there is a ton of money invested in this item that could or could not be exchanged.Have paperwork.:)
Dang, you beat me to writing that ad
zombie1969
06-04-2010, 09:00 PM
I got this thing.Its a dealer installed flasher unit from a 65 elcamino.Says yankee 760 on the knob.And it works.Was under lhs of dash.
http://i113.photobucket.com/albums/n220/Nikoda2002/Cars%20and%20Trucks/20100604_0844.jpg
http://i113.photobucket.com/albums/n220/Nikoda2002/Cars%20and%20Trucks/20100604_0846.jpg
Theres a simalar one on ebay.Guy is wanting $350.His has factory styal conectors while mine doesnt.Mine looks better though with the chrome.
pat565
06-25-2010, 10:33 AM
It would be better to tell me what you need for a 1967 or a big block.
How about a nice set of fenders?
Pat
Hank70SS
06-25-2010, 05:28 PM
Stock front sway bar from a 70 Malibu, 15/16", not the 1.25" bar.
Chrome 4 bolt rad top plate.
Unboxed lower control arms.
Some 70 headlight bezels.
Chrome top alt bracket form a 70 BBC.
70 307 emblems.
Everything is just driver quality but if you can use it it's yours.
RBeckman
06-25-2010, 09:29 PM
On the top of my head I can think of.
1. Leaking heater core
2. 3 broken spark plugs
3. 1 cut spark plug wire
4. 1 broken body mount (just did that today)
5. A couple pounds of sandblasing sand that was under my carpet when I pulled it out.
6. A cheap yellow corvette model that I won at a car show..yeah Hank you were there at Bakers and was really jelous when I won it.
7. Assorted bolts (SAE and Metric) that held my inter fender wells in, I knew I was in trouble when I had to keep going from 3/8 to 10MM wrench to remove them. ( I went and bought the new kit from NPD)
I really need to clean up this mess.
Seriously, I have some stuff that I know others can use, I just have to go in attic and see what it is...
I have changed the engine harness and the front end harnes so if anyone needs any connector from them I do have them and they are yours if you need them.
Hank70SS
06-26-2010, 06:42 AM
Ric, do you have the plastic piece that goes on the end of the water temp lead? My sender has the post and the connector slips on from the side. I need the plastic cover that has an opening along the side where it slips on the sender.
RBeckman
06-26-2010, 08:36 PM
Ric, do you have the plastic piece that goes on the end of the water temp lead? My sender has the post and the connector slips on from the side. I need the plastic cover that has an opening along the side where it slips on the sender.
Hank, I should have and will pull the harness down from the attic and see what I got.
RBeckman
07-02-2010, 08:25 PM
Hank, is the green wire...I have one on my new harness but there is not one on my old harness that I can find..which is really wierd.
Hank70SS
07-03-2010, 06:26 AM
Yup, the green wire. Thanks for looking Ric.
vBulletin® v3.8.6, Copyright ©2000-2024, Jelsoft Enterprises Ltd.