PDA

View Full Version : Lets see some engine & underhood shots


ProStreet67
02-26-2013, 08:26 AM
Post up some pics of your engine and underhood shots, provide some specs too !

A few pics of mine.....

Specs:
863 Horse Power, 800 plus ft lbs tq- All Motor, No Nitrous.
632 Cubic Inch Merlin III Tall Deck Block
Merlin III 350cc Aluminum Heads w/ 2.30 Intakes, 1.94 Exhaust Valves
10.5:1 Compression ( Run 50/50 mix of 93 & Cam 2 Race Fuel, just to be safe)
Solid Roller .700 plus lift
Merlin Intake
1150 Dominator Carb
Mallory HEI Distributor w/ MSD 6AL Box
Hooker Super Comp Headers ( soon to be Lemons Headers for better f it/finish )
3" exhaust with flowmaster original 40 series mufflers w/ turn downs ( going to 3.5" with new sgl chamber Flowmaster race mufflers )

Putting The Power To The Pavement:
400 Turbo- Full Comp Trans, Manual Valve Body, Trans Brake, External Cooler
3500 Converter
4 Link, w/ 9" Rear, Moser Axels, 4:11's
33x21.50x15 Mickey Thompsons on Weld Drag Lites.

earthquake68
02-26-2013, 09:14 AM
Ok, I'll play. Mine's not as violent as yours, but it should be pretty peppy for street driving.

http://i129.photobucket.com/albums/p224/earthquake68/1964%20Chevelle%20SS%20build/Chevelleengineprogress005_zpsd0a2685d.jpg

http://i129.photobucket.com/albums/p224/earthquake68/1964%20Chevelle%20SS%20build/Chevelleengineprogress004_zpsdab2247a.jpg

It's a 327 with:

12:1 forged pistons
steel crank
H-beam rods
aluminum heads
roller rockers
Holley street dominator manifold
700 CFM Holley

Trans is a TH350 with a shift kit and 4,000 stall.

Rear is a stock 10 bolt for now because I haven't built that part yet. :D

ProStreet67
02-26-2013, 10:04 AM
NICE !!! The heartbeat on the firewall is a real nice touch. Verly Clean setup ! Looks great !

flash
02-26-2013, 11:14 AM
Very nice on both ya'lls engines .

earthquake68
02-26-2013, 12:13 PM
Thank you! This is the tribute I'm doing for the car I had in high school. I want it to be as close as I can possibly get it. (Except a little faster since I have more money these days. :D)

bad68
05-19-2013, 07:00 AM
http://i35.photobucket.com/albums/d180/Bad68Nova_/468.jpg (http://s35.photobucket.com/user/Bad68Nova_/media/468.jpg.html)

Aluminum Rect Head 468 11:1 Comp. Big Solid Roller Team G Intake 750 Holley TH400 with a brake and 4000 stall 12 Bolt 4:10's

flash
05-19-2013, 09:04 AM
Nice !!!!!!!!!!!!!!!!!!!!!!!!!!!.

shadowgray396
05-19-2013, 11:06 AM
Some very nice engines in this section

SS Shaun
05-20-2013, 08:44 AM
my 454 in the chevelle as of right now

http://i114.photobucket.com/albums/n271/civiclxb16a/chevelle/2013-02-02_17-09-56_154_zps37be638f.jpg (http://s114.photobucket.com/user/civiclxb16a/media/chevelle/2013-02-02_17-09-56_154_zps37be638f.jpg.html)

and in the camaro
http://i114.photobucket.com/albums/n271/civiclxb16a/camaro/2012-07-23_19-14-09_970.jpg (http://s114.photobucket.com/user/civiclxb16a/media/camaro/2012-07-23_19-14-09_970.jpg.html)

i went from this in my rx7
http://i114.photobucket.com/albums/n271/civiclxb16a/ls1%20conversion/DSC01615.jpg (http://s114.photobucket.com/user/civiclxb16a/media/ls1%20conversion/DSC01615.jpg.html)
to this
http://i114.photobucket.com/albums/n271/civiclxb16a/ls1%20conversion/MyFC.jpg (http://s114.photobucket.com/user/civiclxb16a/media/ls1%20conversion/MyFC.jpg.html)

Ms Grumpy
05-20-2013, 06:48 PM
I know mine is posted somewhere in a thread. As soon as I get some sleep I will be doing some copy and pasting. :)

melonhead
07-24-2013, 05:32 PM
before

http://i1116.photobucket.com/albums/k572/MelonheadMotorsports/SloVelle/PIC_0781.jpg (http://s1116.photobucket.com/user/MelonheadMotorsports/media/SloVelle/PIC_0781.jpg.html)

after

http://i1116.photobucket.com/albums/k572/MelonheadMotorsports/20130714_173005_zpsff9a669a.jpg (http://s1116.photobucket.com/user/MelonheadMotorsports/media/20130714_173005_zpsff9a669a.jpg.html)

shadowgray396
07-24-2013, 07:25 PM
Before
http://i777.photobucket.com/albums/yy58/shadowgray/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/Motor003.jpg (http://s777.photobucket.com/user/shadowgray/media/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/Motor003.jpg.html)

after
http://i777.photobucket.com/albums/yy58/shadowgray/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/944270_600715149950694_1332485069_n2_zpsb65717ef-1.jpg (http://s777.photobucket.com/user/shadowgray/media/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/944270_600715149950694_1332485069_n2_zpsb65717ef-1.jpg.html)

melonhead
07-24-2013, 08:43 PM
holy crap balls

Ms Grumpy
07-24-2013, 09:39 PM
Ray, all I can say is WOW !! WOW !! WOW !!


Before
http://i777.photobucket.com/albums/yy58/shadowgray/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/Motor003.jpg (http://s777.photobucket.com/user/shadowgray/media/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/Motor003.jpg.html)

after
http://i777.photobucket.com/albums/yy58/shadowgray/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/944270_600715149950694_1332485069_n2_zpsb65717ef-1.jpg (http://s777.photobucket.com/user/shadowgray/media/Final%20Build%2070%20chevelle/70%20CTX%20Rebuild/944270_600715149950694_1332485069_n2_zpsb65717ef-1.jpg.html)

shadowgray396
07-24-2013, 10:25 PM
Ray, all I can say is WOW !! WOW !! WOW !!

Thank you, for your kind words. I had a guy last week ask me at the show how I was able to be so detailed with the car and what I did for a living that made me that way. He also would not take no for answer that I did not want to sell the car. It took me almost 1 hours to get the guy off my back.

melonhead
07-25-2013, 03:17 AM
I agree with Ms Grumpy, wow. it is very nice

jfkheat
07-26-2013, 09:23 PM
January 1969 427 4-bolt block bored .060
January 1969 840 heads 2.19 & 1.88 Manley stainless steel valves
Wiseco pistons 10.7:1 compression
Mild Crane Hydraulic cam: 282 Duration 533 lift intake and exhaust
Hooker Headers with 3" exhaust and Pypes Violator mufflers

http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0571.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0571.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0572.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0572.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0577.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0577.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0581.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0581.jpg.html)

earthquake68
07-26-2013, 10:16 PM
I guess Beaumonts were more potent than just a TURBO-jet, those puppies had ASTRO-jets! :D

shadowgray396
07-26-2013, 11:18 PM
January 1969 427 4-bolt block bored .060
January 1969 840 heads 2.19 & 1.88 Manley stainless steel valves
Wiseco pistons 10.7:1 compression
Mild Crane Hydraulic cam: 282 Duration 533 lift intake and exhaust
Hooker Headers with 3" exhaust and Pypes Violator mufflers

http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0571.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0571.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0572.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0572.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0577.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0577.jpg.html)
http://i16.photobucket.com/albums/b15/jfkheat/Beaumont%20Pics/IMG_0581.jpg (http://s16.photobucket.com/user/jfkheat/media/Beaumont%20Pics/IMG_0581.jpg.html)

Very nice looking

ecoman35
08-12-2013, 08:11 AM
http://i253.photobucket.com/albums/hh56/ecoman35/chevelle/IMAG1456_zps59c1e779.jpg (http://s253.photobucket.com/user/ecoman35/media/chevelle/IMAG1456_zps59c1e779.jpg.html)

shadowgray396
08-12-2013, 09:16 PM
http://i253.photobucket.com/albums/hh56/ecoman35/chevelle/IMAG1456_zps59c1e779.jpg (http://s253.photobucket.com/user/ecoman35/media/chevelle/IMAG1456_zps59c1e779.jpg.html)

Sharp and I bet fast.

mestorod70
08-13-2013, 10:12 AM
a few pics.
it finaly runs

mino65
12-08-2013, 08:34 AM
Here is 1 of my MJ496:D

vht
01-15-2014, 07:44 PM
Melonhead, I see you replaced the a/c compressor in your pics, with a BIGGER one!

Hi-po SS 454
03-02-2014, 02:17 PM
http://imagizer.imageshack.us/v2/1024x768q90/203/a3y7.jpg (https://imageshack.com/i/5na3y7j)

Brand new 2 week old Mark Jones www.vortecproperformance.com 468" 570.2 608 torque mello beast. 781 ovals 2.19-1.88 with runner and bowl work. Custom grind hyd roller. Scat crank. Screams, "Got the POWER".
New Center Force DF clutch and Center Force steel flywheel.

Todd
10-03-2014, 10:29 AM
Here a couple of pics of mine.

Ken Hayes
10-03-2014, 10:43 AM
Here's my little 350 / 330 crate.

Ms Grumpy
10-03-2014, 07:23 PM
Ken you have a pretty clean motor having seen it in person. I run down too many dirty roads to keep mine that clean. That's what I get for having family in the sticks. :)

shadowgray396
10-03-2014, 08:16 PM
My motor looks boring compared to all these nice lookng engines.

hkalin
12-13-2014, 03:57 PM
Like a somewhat stock look.

shadowgray396
12-18-2014, 06:33 PM
Looking good

Rattler
12-30-2014, 04:23 PM
Here's mine
http://www.allenitllc.com/hotrods/chevelle/engine/ls1/fuel%20rail%20covers-2.jpg

flash
12-30-2014, 05:56 PM
That looks nice and clean in there .

shadowgray396
12-31-2014, 08:34 AM
Does look clean. Although the master cylinder looks a little small for that engine. Lol

71Stnbrgn
01-01-2015, 07:43 AM
[QUOTE=hkalin;56393]Just needs a few more finishing touches.

http://i814.photobucket.com/albums/zz62/12bolt/71%20Malibu%20Restoration%20Progress/007_zpsdf5f372c.jpg (http://s814.photobucket.com/user/12bolt/media/71%20Malibu%20Restoration%20Progress/007_zpsdf5f372c.jpg.html)



Just looking at your photos (very nice BTW). What have you got for a top on your Master Cylinder. It looks like it's sealed some how.

hkalin
01-02-2015, 07:30 AM
[QUOTE=hkalin;56393]Just needs a few more finishing touches.

http://i814.photobucket.com/albums/zz62/12bolt/71%20Malibu%20Restoration%20Progress/007_zpsdf5f372c.jpg (http://s814.photobucket.com/user/12bolt/media/71%20Malibu%20Restoration%20Progress/007_zpsdf5f372c.jpg.html)



Just looking at your photos (very nice BTW). What have you got for a top on your Master Cylinder. It looks like it's sealed some how.

It just has masking tape still on it from painting.

MaDCoW40
04-25-2017, 01:00 PM
4148 still waiting on my back ordered fan shroud

vinces427bb
09-10-2017, 09:47 PM
bbc427 with alittle boost 12#'s

chevymaher
09-11-2017, 02:48 AM
Nice bet that screams.

shadowgray396
09-11-2017, 08:10 PM
Nice set up.

vinces427bb
09-24-2017, 07:34 PM
Nice bet that screams.
this was the result of a recent easy roll into the throttle take off in drive

67-ls1
09-03-2020, 09:57 AM
My 32 mpg V6 daily driver Chevelle.