Good alignment shop in PA and specs

[Bullcrappy]

front end is getting done this weekend. Need good alignment shop with 50 miles of Phila.

Someone told me good alignment shops are hard to find today...and find one with new equipment.

tube upper/lower control arms
new springs maybe lower an inch
1" rear sway bar
1 3/8" hollow front sway bar
245/60 - 15's all 4

saw these specs some where here. is this what i should shoot for?

*Street Performance*
Camber: -1/2 degrees
Caster: +5 to +5.5 degrees
Toe in: 1/16" total


thx

[flash]

I would find an old timer with good old equipment ,new not always better .

[SS Shaun]

the guy at sears in east stroudsburg does a dam good job on doing alignments

[Bullcrappy]

ya john you may be right....

Thanks SShaun i will keep him as a back up...